Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for Al-Si alloy.
What is Aluminium-Silicon Alloy?
Silicon-aluminum alloy is a binary alloy composed of silicon and aluminum, which can maintain the excellent properties of silicon and aluminum respectively.
Silicon is good in metal alloys used for casting. Because it increases the fluidity of the melt, reduces the melting temperature, reduces the shrinkage associated with solidification, and is very cheap as a raw material. Silicon also has a low density (2.34g/cm3), which may be an advantage in reducing the total weight of casting parts. The solubility of silicon in aluminum is very low; therefore, it precipitates in the form of almost pure silicon, which is very hard, thus improving wear resistance. The content of silicon and aluminum is quite rich, and the preparation technology of silicon powder is mature and the cost is low; in addition, this material has no pollution to the environment and is harmless to the human body.
The density of Si-Al alloy is between 2.4g/cm3 and 2.7g/cm3, and the coefficient of thermal expansion (CTE) is between 7-20ppm/℃. The density and thermal expansion coefficient of Si-Al alloy decrease significantly with the increase of silicon content. At the same time, Si-Al alloy also has excellent properties such as good thermal conductivity, high specific strength and stiffness, good coating with gold, silver, copper and nickel, weldable with substrate, easy precision machining and so on.
Silicon-aluminum alloy is a promising electronic packaging material, especially in high-tech fields such as aerospace, space technology and portable electronic devices.
What Kinds of Silicon-Aluminum Alloys are Available?
The important silicon-aluminum alloy in industry can be divided into four categories:
Hypoeutectic silicon aluminum alloy. The silicon content is between 9% and 12%.
Eutectic silicon aluminum alloy. The silicon content is 11% to 13%.
Hypereutectic silicon aluminum alloy. The silicon content is 15% to 20%.
High silicon aluminum alloy. The content of silicon is more than 22%, mainly 25-70%, up to 80%.
What is Aluminium-Silicon Alloy Used For?
High silicon-aluminum alloy material has excellent tribological properties and can be used as an advanced lightweight wear-resistant material for all kinds of transportation tools, power machinery, machine tools and special fasteners.
High silicon-aluminum alloy is widely used as cylinder liner, piston, rotor and brake disc of automobile engine because of its low specific gravity, light weight, good thermal conductivity, low thermal expansion coefficient, volume stability, wear resistance, corrosion resistance and so on.
It can also be used for high power integrated circuit packaging.
Heat sink parts.
Al-Si alloy is a strong compound deoxidizer. Replacing pure aluminum in the steelmaking process can improve the utilization rate of deoxidizer, purify molten steel and improve the quality of steel.
What Series is an Aluminium Silicon Alloy?
What is Silumin?
Silumin is a group of lightweight and high strength aluminum alloys based on aluminum-silicon system. Aluminum-silicon alloys usually contain 3% to 25% silicon. Casting is the main use of Al-Si alloys, but they can also be used in rapid solidification process and powder metallurgy. Alloys used in powder metallurgy rather than casting may contain more silicon, up to 50%. Silumin has high corrosion resistance, making it suitable for wet environments.
Si-Al Alloy Powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Si-Al alloy powder price, you can send us your inquiry for a quote. ([email protected])
Si-Al Alloy Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality Si-Al alloy powder, please feel free to contact us and send an inquiry. ([email protected])
A preparation developed in China; the comfort and the multifunctional properties of nanomaterials make "dead skin" capable of sensing again. Electronic skin is artificial skin that mimics the function of human skin. Recently, the world-renowned journal Advanced Science reported a simple and highly programmable electronic skin on a leather substrate developed by a Chinese team, which combines the natural complex structure of leather, the comfort of wearing, and the multi-functional properties of nanomaterials. , so that the "dead skin" has the ability to sense again.
In the future, Al-Si alloy will be used in various high-tech fields, and the market demand for Al-Si alloy will also be great. Please contact us for more information on Al-Si alloy.
Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this y…
Did Serbian experts call for higher electricity prices in the country affect the 24v timer relay? According to the Data of the Ministry of Finance, from January…
The aqueous emulsion of zinc stearate is called zinc stearate emulsion. Mainly used as lubricant and mold release agent for styrene resin, phenolic resin, amine resin; also has the function of vulcanizing agent and softening agent in rubber; can be u…