Russia's insistence on paying for Russian gas in rubles has rattled European countries: Greece held an emergency meeting of suppliers, the Dutch government would urge consumers to use less gas, and the French energy regulator told consumers not to panic. Russian gas meets one-third of Europe's annual energy needs.
Russia said they could expand their demand for ruble payments for other commodities, including oil, grain, fertilizer, coal, and metals, which raised the risk of recession in Europe and the US.
Moscow is expected to unveil its ruble payment plan in early April, but it said it would not immediately ask buyers to pay for gas in rubles.
Western countries have said paying in rubles would be a breach of contract, and renegotiation could take months or longer. This uncertainty has pushed commodity market prices higher.
The supply and prices of other commodities like the Zirconium Silicide ZrSi2 Powder could also be affected.
Introduction to Zirconium Silicide ZrSi2 Powder
Zirconium silicide or zirconium disilicide, chemical formula ZrSi2, is a steel gray rhombic glossy crystal, the relative density is 4.8822. Zirconium silicide is insoluble in water, inorganic acid, and aqua regia, but soluble in hydrofluoric acid.
Physicochemical Properties of Zirconium Silicide ZrSi2 Powder
ZrSi2 as a zirconium-silicon intermetallic compound is a kind of ceramic material with high hardness, high melting point, high conductivity, high heat conductivity, and good thermal shock resistance to high temperature. Given the silicon zirconium - intermetallic compound has superior physical and chemical properties, ZrSi2 is a kind of structural material or new engineering material which can be used as the high-temperature corrosive medium.
|Zirconium Silicide ZrSi2 Powder Properties|
|Other Names||zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder|
|Appearance||gray black powder|
|Solubility in H2O||insoluble|
Preparing Methods of Zirconium Silicide ZrSi2 Powder
Zirconium silicide can be obtained from a mixture of zirconium powder and silicon powder at high temperatures under air isolation.
A method for preparing zirconium silicide nanomaterial comprises the following steps:
1. Add 5mmol zirconia, 5mmol silicon powder, and 50mmol lithium metal into a 20ml stainless steel autoclave and seal it. Then put the autoclave into an electric furnace capable of temperature programmed, set the heating rate of the furnace to 10℃ per minute, and heat the furnace to 600℃. The reaction is cooled naturally to room temperature and the autoclave is opened to remove the product which is black sediment.
2. The reaction products were washed with distilled water, then respectively with dilute hydrochloric acid and anhydrous ethanol washing each time, after washing the product of the filter, then 60 ℃ in the vacuum drying oven drying 4 hours get zirconium silicide nanomaterials, based on the preparation of zirconium silicide nanomaterial quality and the quality of the raw material of zirconium dioxide used, it is concluded that the yield of zirconium silicide was 85%.
Applications of Zirconium Silicide ZrSi2 Powder
ZrSi2 can be used as fine ceramic raw material powder to make crucibles or semiconductor film.
Applications of Zr Zirconium
One of the most important applications of zircon is in the production of white pigment impervious agents for surface glazes and pigments in the tile and ceramic industries. Refractory applications are also a common use of zircon in the manufacture of firebricks and shapes used in the steel and glass industries. Due to its high melting point (2200℃), zircalite is used as casting sand for molds and as "flour" for grinding, especially in warmer applications where it is important to maintain the surface quality of castings. The area of expertise known as "investment casting" is the growing use of zircon in the industry. Zirconium is also used in the production of zirconia, zirconium metals, and zirconium chemicals.
Main Supplier of Zirconium Silicide ZrSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality zirconium silicide ZrSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
Prior to the impact of COVID-19 on the chemicals and materials industry and the price of the Zirconium Silicide ZrSi2 Powder, many industry observers expected low to flat growth in 2021 in all regions outside Asia, with many countries seeing slower growth compared to recent years. Operational excellence has long been a hallmark of the Zirconium Silicide ZrSi2 Powder chemical industry, and many companies are financially able to withstand short-term dips in end-market demand due to rapid leverage from reduced capex on hand.
The analysis shows that, whatever the final course of the pandemic, we can expect the inevitable long-term effects. Workplaces are expected to slowly return to pre-COVID-19 practices. Companies investing in enterprise-wide digital initiatives saw these "payoffs" in the early pandemic environment. For more information about Zirconium Silicide ZrSi2 Powder, please feel free to contact us.
Foamed concrete is a highly entrained sand cement with at least 20% air volume in the cured product.…
The African Development Bank will finance $25 billion by 2025 to support Africa's fight against climate change, the bank's president said at the bank's annual meeting in Accra, Ghana. He noted that climate change has had many negative impacts on the…
Natural graphite is a refractory material with a high melting point of 3650 °C, and it is a good conductor of heat and electricity.…