Products

  • 0
  • 0

The Influence of Metal 3D Printing Process Chain on the Properties of TC4 Powder

Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles.  

German Vice-Chancellor, minister of economy and climate protection, said Germany's gas supplies were secure for now, but he urged consumers and businesses to reduce consumption, saying "every kilowatt of electricity counts." 

Germany's gas network regulator can ration gas if supplies run short. Plants would be the first to be affected. Special treatment will be provided to private families, hospitals, and other important institutions.  

Half of Germany's 41.5 million households use natural gas for heating, and industry consumption accounts for a third of the country's 100 billion cubic meters of gas demand in 2021.  

The price of many energy and commodities like the Ti6Al4V powder could be affected.


In the powder bed laser melting technology, from the production, transportation, storage, printing and recycling of materials, the powder has been under a variety of mechanical and atmospheric environments throughout the process chain, the chemical composition and shape of the powder particles, and the entire process. The characteristics of powder materials may be affected by factors such as the atmosphere, temperature, humidity, and external forces. This article discusses the potentially important influencing factors of TC4 powder in the entire process. The research results can be used in other powder processing and management to ensure the quality of the material throughout the service life and make the SLM process more robust and reliable.

10

In order to evaluate the characteristics and batch stability of the powder, the same specifications and two batches produced by TC4-Ti6Al4V(level 5) three different processes (gas atomization EIGA, plasma atomization PA, inductively coupled plasma atomization ICPA) were studied. For powders, the particle size distribution, particle morphology and fluidity of these powders were measured.

The results show that the sizes of the three powder particles are between 15-65 microns, with a Gaussian distribution, but the PA and ICPA powders show a wider particle size distribution compared with the EIGA powder. The flow time measured by the Hall flowmeter is in the range of 14.6s-16.1s, indicating that all powders and batches have good flowability. Electron microscopy results show that the three powders have high spherical shapes, but the EIGA powder particles are slightly elongated, while the ICPA powder contains a lot of satellite powder.


In order to study whether argon protection is required during powder storage, two powder containers were stored under the same conditions of 30°C and 30% relative humidity. One container has been stored intact, and the protective atmosphere of the other container is destroyed by one opening process. After a storage period of ten days, samples for mechanical testing and elemental measurement were prepared.


The results of the tensile test show that the ultimate tensile strength of the sample is basically the same in a protective atmosphere and an unprotected atmosphere; the powder stored in a humid environment has the highest ultimate strength, which is slightly higher than that of the dry powder printed sample 5%, and the elongation rate dropped severely. Gas content measurement confirmed that in a humid environment, the oxygen content of the sample is about 10% higher than that in a dry environment, which leads to material embrittlement.


About KMPASS:

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Ti6Al4V Powder, please send an email to: sales2@nanotrun.com


Because of the conflict between Russia and Ukraine, there is a shortage of natural gas supply. At the same time, other renewable energy sources cannot produce enough electricity, so electricity prices have soared in many countries of the world. For this reason, I assume the supply and prices of the Ti6Al4V powder would keep being influenced by the high energy prices.

Inquiry us

Our Latest Products

Structure of Molybdenum Carbide Mo2C

Molybdenum Carbide, with the chemical formula Mo2C. It has the characteristics of high melting point and hardness, good thermal stability and mechanical stability.…

The main application of titanium diboride TiB2 powder

Titanium diboride (TiB2) is the most stable compound among boron and titanium, and is mainly used for the preparation of composite ceramic products.…

How is lithium 12-hydroxystearate produced?

Lithium 12-hydroxystearate is widely used in lubricants, stabilizers, bleaching agents, thickeners. Product Name:Lithium 12-Hydroxystearate…